|
PCI Express 1x, 4x, 8x, 16x bus specification users reports and reviews |
| Date | User opinion | Comment | Content Revision |
Approved by moderator? |
|---|---|---|---|---|
| CORRECT | APPROVED | |||
| CORRECT | APPROVED | |||
| CORRECT | where is the chart? | APPROVED | ||
| 2009-04-26 00:12:34 | CORRECT | rev. 2 | APPROVED | |
| 2010-08-20 15:57:36 | CORRECT | rev. 3 | APPROVED | |
| 2010-10-07 22:20:22 | ERROR FIXED | PRSNT#1 is connected to GND on motherboard. Add on card need to have PRSNT#1 connected to one of PRSNT#2 depending what type of connector is in use. Explanation for PRSNT#1 is incorrect. Edin | rev. 3 | APPROVED |
| 2011-10-22 22:27:54 | CORRECT | rev. 4 | APPROVED | |
| 2012-01-03 01:39:43 | INCORRECT | B3 for the PCIe connector definition should be +12V. It is reserved as shown for the x4 and x8 lengths. As a design note, x4 boards and x8 boards are frequently used in x16 slots so adding the "extra +12V" connection can be a good thing. | rev. 4 | APPROVED |
| Date | Author | Content Revision |
Comment |
|---|---|---|---|
| 2009-06-20 12:39:01 | rev. 3 | ||
| 2011-01-21 21:54:46 | David Baker | rev. 4 | pin 28 on 4x and 8x pinouts should read HSOn(3) vicd HSOn(0) also corrected "need" to "needs" in last sentence. |
| 2011-01-21 21:55:04 | David Baker | rev. 4 | pcie 4x pinout pin 28 should read HSOn(3) vice HSOn(0) |
Pinouts.ru > Pinout of PCI Express 1x, 4x, 8x, 16x bus and layout of connector |
should be correct |